The Optima TFprofi presents the perfect combination of high performance and reduced tractor power requirement. The hydraulic folding trailed frame with eight sowing units comes together with a 2,000 litre fertiliser hopper.
The Optima TFprofi is either equipped with a hydraulically or mechanically driven fan and can be operated even by a tractor of 80hp only. No lifting power is required.
The fertiliser hopper can easily be filled with a front loader, big bags or as an option by filling auger. Different fertiliser coulters are available. As an option the fertiliser application can be driven electro-hydraulically.
The combination of the Optima with iXtra LiFe allows the application of liquid fertiliser during seeding. For more information, please see iXtra LiFe.
|Working width/transport width||6m/2.98m||6.4m / 3.4m|
|Number of rows||8 HD-II or 8 SX sowing units||8 HD-II or 8 SX sowing units|
|Row width (cm)||70/75||80|
The Optima TFprofi offers constant seeding depth control and high frame stability.
Convenient coupling and great manoeuvrability
As standard the TFprofi is equipped with a CAT3N cross shaft. Thus the pivot point lies substantially behind the tractor tyres. This brings two advantages for the driver. Firstly turning at angles of up to 90° are possible, secondly the Optima TFprofi follows the tractor tracks in curves. The fan is assembled on the cross shaft. Thus the pto shaft is always straight and the wearing of the universal joints is minimized.
Four wheel chassis for maximum stability
The Optima TFprofi can be equipped with four landwheels as an option. They carry the machine during work and half the ground pressure both in work and on the headlands.
The landwheels are fully floating; thanks to an intelligent hydraulic system that allows the wheels to follow the ground contours individually. All four hydraulic cylinders are of dual chamber design. The upper part of the machine cylinder is for the lifting and lowering of the machine. The lower chamber is connected to the adjacent cylinder, to enable the cylinders to counterbalance each other. This allows the landwheels to follow the ground contours individually (by as much as 15cm in either direction) which guarantees the same constant pressure on all wheels. At the same time when working in rough conditions frame movements are reduced by 50%. This results in improved smoothness of ride, even at higher working speeds of up to 12km/h.
Comfort on the road
To prepare the TFprofi for road transport, the driver simply starts the folding process directly from the tractor cab. The wing sections are hydraulically swung to the front of the machine next to the drawbar. The transport width is 2.98m only (3.40m at 80cm row width). A maximum transport speed of 40 km/h is possible even with a 3/4 filled hopper when equipped with the optional pneumatic or hydraulic brake system.
For mulch and conventional sowing
Seeding heart without seals for HD-II
Up to 18km/h for utmost efficiency
Seeding heart – Optima SX
e-drive II – complete control and monitoring of the machine from the tractor cab in accordance with ISOBUS standard
The new fertiliser hopper has a capacity of 2,000l. The wide opening of nearly 3m enables the filling with front loader or big bags. An optional filling auger is also available.
The dosing units can, as an option, be driven electro-hydraulically. This is controlled and monitored via ISOBUS. The electro-hydraulic drive of the metering device enables constant adaptation of the application rate during work (as well as via application charts with GEOCONTROL). In addition the exact switching on/off at headlands is also possible.
The fertiliser dosing is done by two quad outlet dosing units. Each row comes with its own air support to ensure the steady conveyance of high amounts of fertiliser especially when working on hillsides.
Another option is that the fertiliser hopper can be placed on 4 weigh cells for a constant control and monitoring of the application rate. Prior to operation, the amount of fertiliser required for the job can be filled into the hopper and can be adjusted to what is really needed.
For contractors whose machines work for several customers, a further advantage is the possibility to invoice the fertiliser used accurately to the kilogram.
Micro-drill for Optima HD-II and SX sowing units
The demand for microgranule applicators is increasing. Micro nutrients and also small amounts of insecticides or fungicides ensure the best start of the crop.
The electric driven micro-drills for the Optima HD-II and SX sowing units have been designed as backpack behind the sowing units and offer a hopper capacity of 17 liters.
They are electrically driven and ISOBUS controlled. The metering device consists of a wear-resistant plastic housing with exchangeable cell wheels made of stainless steel. This ensures the precise metering of the micro granules.
The engineers had focus on highest level of operator’s safety by offering easy and safe handling of the applicator. Therefore, the operator can exchange the cell wheels even when the hoppers are full of micro granule. There is no need to empty them first, reducing the operator’s risk of getting in direct contact with the granules.
A plus for the environment
The micro granules fall freely into the seed furrow without any air support, minimising the emission of dust. Therefore, the new micro-drill fully complies with the current guidelines for emission control of any granules applied.
The comfortable, fully ISOBUS integrated control system allows the adaption to the stop and starting points of the seed row. This ensures precise shutting on and off at the end of the field and in tramlines (without overlaps or faults).
IsoMatch GEOCONTROL - Cost saving with immediate payback
Seeding with GPS and GEOCONTROL in combination with an electric driven precision drill is a major step towards precision and cost saving. These machines are all equipped with ISOBUS technology which with the help of the IsoMatch Tellus terminal, can be easily controlled.
Each electric driven seeding element, in combination with GPS and GEOCONTROL, is automatically switched on or off in exactly the right place, ensuring there is no overlap with any row that has already been seeded. This is especially handy in triangular fields, on curved or irregular shaped headlands.
GEOSEED - Precision at high end
GEOSEED is offered in two different levels:
GEOSEED Level 1 is the synchronization in the machines working width. This improves the distribution of seeds up to perfection in parallel or diamond pattern: Positive effects are the best use of nutrients, water and sun. Also the wind and water erosion is decreased.
GEOSEED Level 2 is the synchronization in the whole field. This is the necessary requirement for interrow cultivation, also across the seeding direction. GEOSEED is the only system in the world, that makes this mechanic weeds control possible!